1. Facilitates measurement of gear thickness.

2. Mm/inch conversion

3. Zero-setting at any position. ...

[Expiration Date: May 02, 2013]

1. With high hardness, stable function, long working life.

2. Free from deterioration and wrinking, ...

[Expiration Date: Dec 08, 2012]

Up to 1000 mm to DIN EN ISO 3650
Grades 00, 0, 1 and 2
Supplied as single gauge blocks or in sets ...

[Expiration Date: Dec 08, 2012]

1. Micrometers are also known as a nicrometer screw gauge, is a device used widely in mechanical ...

[Expiration Date: Dec 08, 2012]

1. Used for checking the mutual position or two adjacent surfaces of vehicles.
2. Can measure the gap ...

[Expiration Date: Sep 07, 2012]

1. Designed to be installed on the machines and fixtures to measure the axial movement.

2. Can be ...

[Expiration Date: Jul 11, 2012]

The accuracy of electronic digital caliper depends on the accurancy of mechanical parts, electronic module ...

[Expiration Date: May 02, 2013]

1. In the international standard specification of EN BS ISO 10360 Part 2, the step gauge was described as a ...

[Expiration Date: Dec 08, 2012]

Ceramic Gauge Blocks to DIN EN ISO 3650
Up to 100 mm
Grades 00, 0, 1 and 2
Supplied as single gauge ...

[Expiration Date: Dec 08, 2012]

1. Resolution: 0.005mm.
2. With data output interface.
3. Zero-setting at any position.
4. Nice ...

[Expiration Date: Dec 08, 2012]

Anyi's Dial Calipers With Carbide-Tipped Jawprovides inside and outside carbide-tipped measuring faces for ...

[Expiration Date: Sep 07, 2012]

Features:

Thin chisel edge contacts are convenient to measure the narrow grooves in the hole.

[Expiration Date: Jul 11, 2012]

1. Thin and long rod, pointed contact, flat contact or spherical contact is available for different needs.  ...

[Expiration Date: May 02, 2013]

Main scale jaw can be slid up and down to measure stepped sections.

[Expiration Date: Feb 20, 2013]

1) Resolution: 0.0lmm 2) Repeatability: 0.01 mm
3) Technical Standard: JB560991 4) Max response speed: L ...

[Expiration Date: Dec 08, 2012]

1. Resolution: 0.1 degree;
2. Repeatability: + /-0.1 degree;
3. Measuring range: +/-180.00 degree (0-360 ...

[Expiration Date: Dec 08, 2012]

1. Can measure the width of groove and reach the inside wall of holes and concave portions.
2. Mm/inch ...

[Expiration Date: Nov 02, 2012]

Feature:
1.360 degree measure range;
2. Display always read upright, no matter which way the level is ...

[Expiration Date: Jul 18, 2012]

The step gauge swivel support can adjust angles to reach different use status, horizontal, vertical, or ...

[Expiration Date: May 02, 2013]

1. With large digital display
2. Relative and absolute measurement
3. Metric and Inch coversion
4. High ...

[Expiration Date: Feb 20, 2013]

1. Carbide-tipped scriber.
2. Can easily measure height of small workpieces.
With fine adjustment.
3. ...

[Expiration Date: Dec 08, 2012]

1. Easy to measure all kinds of angles and draw lines.
Absolute and incremental conversion.
2. Display ...

[Expiration Date: Dec 08, 2012]

1. Chrome-plated frame.

2...Pointed anvils and spindles are ideal for measuring the web thickness of ...

[Expiration Date: Nov 15, 2012]

Extra large LCD for easy reading, Resolution: 0.001mm.
Carbide-tipped measuring faces.
Manual power ...

[Expiration Date: Aug 04, 2012]

1. Digital caliper with Interchangeable Jaws has more usage than ordinary digital calipers. The outside ...

[Expiration Date: May 02, 2013]

1. With large digital display
2. Relative and absolute measurement
3. Prepare real position value
4. ...

[Expiration Date: Feb 20, 2013]

1. Measure the virtual pitch diameter and simple pitch diameter of internal and external thread.

2. With ...

[Expiration Date: Dec 08, 2012]

1. Designed for depth measurement in daily security inspection, calibrating the tire weariness.
2. Light ...

[Expiration Date: Dec 08, 2012]